operationsIT
asked on
I have a Brocade 300 configuration to add new server to talk to tape drive
Hello EE,
I have a Brocade 300 with port 3 going to a HP Server
I want to swing this cable to a new HP Server so on the Brocade can be used to talk to the tape drive from the new server.
I admit some lack of expertise, but assume the port is good and I only need to:
1. Add alias for the new server.
2. Rename zone if desired, but add member and remove old server member (see attached)
Am I missing anything?
Current.JPG
I have a Brocade 300 with port 3 going to a HP Server
I want to swing this cable to a new HP Server so on the Brocade can be used to talk to the tape drive from the new server.
I admit some lack of expertise, but assume the port is good and I only need to:
1. Add alias for the new server.
2. Rename zone if desired, but add member and remove old server member (see attached)
Am I missing anything?
Current.JPG
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
Great thanks for clarification
ASKER
Than add alias for the new server and add it to the zone after removing the old server?