Solved

Cisco CUCM 10: Can you block an incoming call using just a translate pattern

Posted on 2016-07-19
2
64 Views
Last Modified: 2016-07-26
I've been trying to block calls from a specific number that comes in from the PSTN over a SIP trunk. I am trying to use the "Block This Pattern" feature within Translation Pattern Configuration to make this happen. The process I read on the support forum below would have me making more changes than I want to do and I don't have a lab to make sure it wouldn't harm something. I just want all calls from a specific number to hit the bit bucket. Could I do it with just a translation or other simpler method?


https://supportforums.cisco.com/document/71966/blocking-calls-based-calling-party-id
Screencap_4011-Jul.-19-13.27.jpg
0
Comment
Question by:amigan_99
2 Comments
 
LVL 1

Accepted Solution

by:
chrisat earned 500 total points
ID: 41725955
The link that you provided is the method that we use. From my experience, only using the block this pattern setting for a Translation Pattern is only going to block a call based on the DNIS or destination number not ANI or originating number.
0
 
LVL 1

Author Closing Comment

by:amigan_99
ID: 41729764
TY
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
How to setup a Voice VLAN on a Cisco Meraki MS220-24 3 89
EIGRP Configuration 2 46
No RSTP between switches 3 49
POE switch 8 3
I recently updated from an old PIX platform to the new ASA platform.  While upgrading, I was tremendously confused about how the VPN and AnyConnect licensing works.  It turns out that the ASA has 3 different VPN licensing schemes. "site-to-site" …
From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

24 Experts available now in Live!

Get 1:1 Help Now