Solved

Setting up remote IP phones through sonic wall

Posted on 2016-07-21
4
44 Views
Last Modified: 2016-08-22
So our enter network is one one\ vlan1 except for our phone system which is on a whole different subnet.
We had to create a route on the sonic wall so that we can access it. When I tried to use the Wizard to do port forwarding it doesn't work.
But i can port forward to anything on the same vlan....how do I get the sonic wall to work? I been trying at this for weeks.
0
Comment
Question by:Korrupt3dazn
  • 2
4 Comments
 
LVL 12

Accepted Solution

by:
DarinTCH earned 500 total points (awarded by participants)
ID: 41724999
have you configured the VOIP>settings
do you have local IP phones working
are you reaching the remote phones thru your LAn or a VPN?
what kind of phones?

need more info

also have you read the basic voip Dell guide
http://help.mysonicwall.com/sw/eng/705/ui2/23200/VoIP/Settings.htm
0
 
LVL 23

Expert Comment

by:masnrock
ID: 41725849
Your question is fairly vague. How exactly are you trying to have the remote phones work?

What ports are required, and are both subnets translating to the same public IP?
0
 

Author Comment

by:Korrupt3dazn
ID: 41728317
Here are some info that is simlar to our IP setup. I can port forward to anything on the 10.99.0.x network. But if I tried to do the same to the  10.51.1.x network I can't reach it. But Can reach it internally...Sorry pretty new to networking.

LAN IP is; 10.99.0.1-10.99.0.254
LAN SUB: 255.255.0.0
LAN Gateway ( Sonicwall): 10.99.0.4

Mitel IP is 10.51.1.2
Mitel SUB: 255.255.0.0
Mitel Gateway: 10.51.1.1




have you configured the VOIP>settings
-Havent dont that

do you have local IP phones working
-YES

are you reaching the remote phones thru your LAn or a VPN?
They are coming in thru wan.
I tried forwarding the Mitel Ports to it an no luck.

what kind of phones?
Mitel 5320
0
 
LVL 12

Expert Comment

by:DarinTCH
ID: 41754745
Answer provided
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Citrix StoreFront problem, internal storefronts are not working 34 37
ACL Logging Optimization 7 31
Shoretel Edge Gateway 5 45
BGP Network restrictions 6 22
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

863 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

21 Experts available now in Live!

Get 1:1 Help Now