Solved

DNS Entries for DMZ - Windows 2003 Server

Posted on 2016-07-22
1
24 Views
Last Modified: 2016-07-22
Hi

I have a site with 1 AD, 2 AD servers with DNS. The AD has 2 Sites, main LAN and DMZ.

LAN IP 192.168.1.x
DMZ IP 192.168.3.x
DMZ contains 2 servers MS01 and FS03

We had some "principal target" errors between servers and FRS did not work. During troubleshooting one of our guys accidentally deleted the forward lookup zone on the DNS server AD01, duh!

In restoring this the primary zone was then recreated and we reset the machine account PW with netdom, which fixed the FRS issue, but the deletion of the FLZ means that MS01 and FS03 do not longer resolve, access via IP is fine.

How do I start do diagnose what is missing?

Many thanks
Tom
0
Comment
Question by:captain
1 Comment
 
LVL 30

Accepted Solution

by:
captain earned 0 total points
ID: 41724997
Silly simple really :D

I forgot to add the two servers to the Forward Lookup Zone.

Fixed.
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Many of us in IT utilize a combination of roaming profiles and folder redirection to ensure user information carries over from one workstation to another; in my environment, it was to enable virtualization without needing a separate desktop for each…
We recently endured a series of broadcast storms that caused our ISP to shut us down for brief periods of time. After going through a multitude of tests, we determined that the issue was related to Intel NIC drivers on some new HP desktop computers …
Viewers will learn how to properly install and use Secure Shell (SSH) to work on projects or homework remotely. Download Secure Shell: Follow basic installation instructions: Open Secure Shell and use "Quick Connect" to enter credentials includi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

827 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question