• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 106
  • Last Modified:

configuring snmp v2 or v3 on Cisco switches

Hi experts,

I need assistance on how I can configure snmp v2 and snmp v3 on Cisco switches. I also want to know how to list all the traps that are suppose to be monitor.

I am new in network management and would be helpful if I can get some guidance.

Thanks
0
Zak Z
Asked:
Zak Z
1 Solution
 
AkinsdNetwork AdministratorCommented:
1
 
Aaron StreetInfrastructure ManagerCommented:
To configure Snmp V2 its simply in global config  (see Akinsd comment for V3)

snmp-server community <password> RO
snmp-server community <password> RW

you can find the Cisco MIB files for your device to tell you what values can be monitored along with the standard ones.

Traps are sent depending on how the loging is set up.

using the "logging trap critical" for example will send all critical logs to the snmp trap server.
1

Featured Post

Evaluating UTMs? Here's what you need to know!

Evaluating a UTM appliance and vendor can prove to be an overwhelming exercise.  How can you make sure that you're getting the security that your organization needs without breaking the bank? Check out our UTM Buyer's Guide for more information on what you should be looking for!

Tackle projects and never again get stuck behind a technical roadblock.
Join Now