Solved

Error when saving Group Policy for Mapped Network Drive

Posted on 2016-07-25
7
29 Views
Last Modified: 2016-09-09
Hello Everyone,

we are having issues when trying to save a group policy which was working perfectly fine until recently. the error message is "The scripts component is unable to save the changes due to error 32". I looked in the vent log on the DC but found nothing. What this cause is any new locations or modifications to existing mapped drives does not take effect. When we check the computers they receive the GPO using gpresult /r however the new changes does not take effect.

Below are the what I have done;

Confirmed the unc paths are accessible
confirmed I am able to edit the batch file in the save location
Capture.PNG
0
Comment
Question by:RicDz
  • 3
  • 2
7 Comments
 
LVL 13

Expert Comment

by:Rizzle
ID: 41728187
What happens if you create a new GPO and specify the MappedNetworkDrive.bat logon script inside that new GPO?

Have you confirmed the script is working if you run it manually?
0
 

Author Comment

by:RicDz
ID: 41729558
Hi Roshan,
I manually ran the script but nothing happens. There is no error in GPO or windows event log on machine.
0
 
LVL 13

Expert Comment

by:Rizzle
ID: 41729813
That would indicate an issue with the script itself rather than Group Policy.
0
Back Up Your Microsoft Windows Server®

Back up all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

 

Accepted Solution

by:
RicDz earned 0 total points
ID: 41731323
Issue resolved, turns out that there was no Go to the end at the end of each location which made the script failed. I still get that 32 error but folders are mapped.
0
 
LVL 13

Expert Comment

by:Rizzle
ID: 41731666
That's good.... had a feeling it was the script itself.
0
 
LVL 34

Expert Comment

by:Seth Simmons
ID: 41790972
This question has been classified as abandoned and is closed as part of the Cleanup Program. See the recommendation for more details.
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Normally after a failure of Domain Controller, when promoting new DC the DC is renamed, we will discuss the options in Dcpromo to re-create the DC with the same name. Scenario: You are a small IT shop with two Domain Controllers (Domain Contr…
OfficeMate Freezes on login or does not load after login credentials are input.
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

807 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question