Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

How to Change Interface on Cisco IOU

Posted on 2016-08-03
11
Medium Priority
?
176 Views
Last Modified: 2016-08-11
Hello Experts,

Can someone please let me know how to change the interface eth0 in the image with the appropriate Unix / Linux commands. I would like to change the interface from 192.168.80.160 to 192.168.99.5.

Thank you

Regards
ciscoIOU.png
0
Comment
Question by:Member_2_7966113
  • 6
  • 5
11 Comments
 
LVL 9

Expert Comment

by:James Bilous
ID: 41740782
Yup:

ifconfig eth0 192.168.99.5 netmask 255.255.255.0 up

Open in new window

0
 
LVL 1

Author Comment

by:Member_2_7966113
ID: 41740810
James,

Thanks spot on.

Cheers
0
 
LVL 1

Author Comment

by:Member_2_7966113
ID: 41740813
James

Can you let me know how to save the configuration?
0
Concerto's Cloud Advisory Services

Want to avoid the missteps to gaining all the benefits of the cloud? Learn more about the different assessment options from our Cloud Advisory team.

 
LVL 9

Expert Comment

by:James Bilous
ID: 41740816
Whats your distro? This usually involves editing a config file which is distribution independent.
0
 
LVL 1

Author Comment

by:Member_2_7966113
ID: 41740830
James,

No idea what distro is.

I thought there would be a simple command to save the configuration - or does it work the same was Windows?
0
 
LVL 9

Expert Comment

by:James Bilous
ID: 41740838
Distro is your linux distribution. For example, you may have Ubuntu, Linux Mint, Suse, Red Hat, etc. etc, all linux based but still different operating systems, each with different ways of saving configurations.

If you are on Ubuntu, for example, you can simply use the "network management" application to set and save the IP for the eth0 interface. You can also edit a configuration file, /etc/network/interfaces, and save it to persist the changes across reboot.
0
 
LVL 1

Author Comment

by:Member_2_7966113
ID: 41741219
Hi James,

Can you show me the linux / unix commands to set the default gateway?

Thanks
0
 
LVL 9

Expert Comment

by:James Bilous
ID: 41741266
You can simply use the same command but leave the IP unchanged while changing the default gateway.
0
 
LVL 1

Author Comment

by:Member_2_7966113
ID: 41744619
James,

Do you mean

ifconfig eth0 192.168.99.5 defaultgateway 10.1.1.1
0
 
LVL 9

Accepted Solution

by:
James Bilous earned 2000 total points
ID: 41744646
Ah, sorry, thought you meant mask and not gateway.  

route add default gw 10.1.1.1

Open in new window


should work
0
 
LVL 1

Author Closing Comment

by:Member_2_7966113
ID: 41753094
Perfect .  Thanks
0

Featured Post

VIDEO: THE CONCERTO CLOUD FOR HEALTHCARE

Modern healthcare requires a modern cloud. View this brief video to understand how the Concerto Cloud for Healthcare can help your organization.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
This article will show you step-by-step instructions to build your own NTP CentOS server.  The network diagram shows the best practice to setup the NTP server farm for redundancy.  This article also serves as your NTP server documentation.
Connecting to an Amazon Linux EC2 Instance from Windows Using PuTTY.
In a previous video, we went over how to export a DynamoDB table into Amazon S3.  In this video, we show how to load the export from S3 into a DynamoDB table.
Suggested Courses
Course of the Month6 days, 19 hours left to enroll

782 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question