Solved

Linux Hanging with disable Error Output

Posted on 2016-08-05
4
112 Views
Last Modified: 2016-08-09
Hello Experts

My Linux device keeps on hanging with the error message below.When I try to enter a command nothing happens.

Can someone let me know whats happening

linux
0
Comment
Question by:Member_2_7966113
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 25

Expert Comment

by:madunix
ID: 41744691
It could be a hardware problem with the cpu/mobo/something-like-that.; performing full hardware diagnostics against the machine is generally the only method to rule this out
0
 
LVL 1

Author Comment

by:Member_2_7966113
ID: 41745176
madunix

Thanks for responding.

Can you let me know how to perform full hardware diagnostic?

Regards
0
 
LVL 25

Accepted Solution

by:
madunix earned 500 total points
ID: 41745188
To have a complete hardware diagnostic, you can check with the server vendor regarding the diagnostic tools for the specific hardware and model no.   If you want to check the health of OS, You can use sar to collect, report, or save system activity information such as:
* CPU / IO / System / Nice / Idle percentages
* Network Traffic / Network Errors
* Load Average and Run queue
* Interupts
* Memory Free / Cached / Buffered / Swapped
* Device usage per Major/Minor number
* And many others.

https://www.thomas-krenn.com/en/wiki/Collect_and_report_Linux_System_Activity_Information_with_sar
0
 
LVL 1

Author Closing Comment

by:Member_2_7966113
ID: 41749328
thanks a lot that solved the problem
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If you have a server on collocation with the super-fast CPU, that doesn't mean that you get it running at full power. Here is a preamble. When doing inventory of Linux servers, that I'm administering, I've found that some of them are running on l…
Note: for this to work properly you need to use a Cross-Over network cable. 1. Connect both servers S1 and S2 on the second network slots respectively. Note that you can use the 1st slots but usually these would be occupied by the Service Provide…
Connecting to an Amazon Linux EC2 Instance from Windows Using PuTTY.
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
Suggested Courses

626 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question