Solved

Windows !0 Issues

Posted on 2016-08-10
12
56 Views
Last Modified: 2016-09-18
We have had about 10 windows 10 machines that once upgrading and attacted to our network, it has brought i network to a crawl or even a stand stil.  The wierd thing is that not all machines that have windows 10 seem to do it.   Any suggestions?
0
Comment
Question by:Sean Fabian
  • 4
  • 2
  • 2
  • +3
12 Comments
 
LVL 54

Assisted Solution

by:McKnife
McKnife earned 100 total points (awarded by participants)
ID: 41750185
You'll have to monitor network activity. There's no known issue with 10 that would explain this "crawl/standstill". We upgraded our network to 10 completely and there is no such standstill to be seen.
You might be able to describe the symptoms better.
0
 
LVL 70

Assisted Solution

by:Merete
Merete earned 100 total points (awarded by participants)
ID: 41750196
Check two things
that all are using internet protocol version 6 (TCP/IPv6  as well as IPv4 in network sharing change adapter settings>properties of local area connection
If using cable ethernet disable wireless
check if wireless is interfering
Has the router been rebooted?
How old is the cables? Try testing with another cable
0
 
LVL 93

Assisted Solution

by:John Hurst
John Hurst earned 100 total points (awarded by participants)
ID: 41750225
Windows 10 uses standard networking and defaults will work.

Are these machines updating?  The anniversary update is very large

You can try sharing the updates. Start, Settings, Updates, Advanced Options, Choose how updates are delivered. Use the setting for "More than one place (other computers)"
0
Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

 
LVL 88

Assisted Solution

by:rindi
rindi earned 100 total points (awarded by participants)
ID: 41750245
Disable all the Windows 10 crapps that could be calling home.

Besides that, if you aren't yet on build 1607 which was released on the 2nd of August, your systems might be automatically downloading the upgrade. As this is a big download (ca. 4GB) this can of course make your LAN slow down.
0
 
LVL 6

Accepted Solution

by:
Wayne Herbert earned 100 total points (awarded by participants)
ID: 41750307
One other thing, probably irrelevant, that made several of my Win 10 conversions painfully slow, and that is the indexing of Outlook OST and PST files.  When you get through running the Win 10 update, by default the Windows indexing service (not Outlook indexing) automatically includes all the Outlook data files.  I have several users that besides having ginormous OST files had multiple large network connected PST file archives.
 
Disk usage on the PC was at 100 percent and the PC so sluggish and unresponsive, network or otherwise, that it behaved as though it was completely locked up, although a five minute wait usually produced some results.  Disabling Win 10 indexing of Outlook solved the problem for me.
0
 
LVL 70

Assisted Solution

by:Merete
Merete earned 100 total points (awarded by participants)
ID: 41751340
This just in
Fix Slow Internet After Windows 10 Anniversary Update, Here’s How
http://www.redmondpie.com/fix-slow-internet-after-windows-10-anniversary-update-heres-how/
0
 
LVL 93

Expert Comment

by:John Hurst
ID: 41751345
I have my machines set as default per that article and my internet on my two machines and a couple of client machines is not slow. So I would proceed cautiously before disabling defaults. At least document well what you have so you can revert if need be.
0
 
LVL 19

Expert Comment

by:compdigit44
ID: 41757139
as other have mentioned I think it would  be very beneficial to get a packet trace from a Windows 10 machine to see what type of network traffic is coming in and out of the workstation so you know what your are dealing with..
0
 
LVL 93

Assisted Solution

by:John Hurst
John Hurst earned 100 total points (awarded by participants)
ID: 41757141
You can use Wireshark to see network traffic on a machine. I use CommView to do this.
0
 
LVL 19

Expert Comment

by:compdigit44
ID: 41758625
0
 
LVL 93

Expert Comment

by:John Hurst
ID: 41777316
@Sean Fabian - We gave you ways to solve your issue that work. Did you try any?
0

Featured Post

NAS Cloud Backup Strategies

This article explains backup scenarios when using network storage. We review the so-called “3-2-1 strategy” and summarize the methods you can use to send NAS data to the cloud

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

When you start your Windows 10 PC and got an "Operating system not found" error or just saw  "Auto repair for startup" or a blinking cursor with black screen. A loop for Auto repair will start but fix nothing.  You will be panic as there are no back…
While rebooting windows server 2003 server , it's showing "active directory rebuilding indices please wait" at startup. It took a little while for this process to complete and once we logged on not all the services were started so another reboot is …
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles to another domain controller. Log onto the new domain controller with a user account t…

832 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question