Solved

RDWeb and RD Gateway

Posted on 2016-08-16
4
76 Views
Last Modified: 2016-09-07
Hi All,

i am looking to setup a remote app deployment via RDS on server 2012, i have setup the following

server 1, RDLicence server on a DC
server 2, RDCB and RDWeb
server 3, RDGW
server 4, RDSH

internally we can hit the RDWeb and the apps display and run as they should.

i am getting stuck on how this works externally, if we are to hit the gateway server externally how does this know were to pass on the request for the rdweb apps as i cant see were to configure that option (am i missing something obvious?)

i can make the rdweb external facing and then i can see everything but this from what i see isnt best practice.

any help to put me on the right path would be great, thanks in advance
0
Comment
Question by:ncomper
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
4 Comments
 
LVL 42

Expert Comment

by:kevinhsieh
ID: 41758886
You have to hit RD web externally. You configure RD web to use RD gateway.
0
 
LVL 37

Assisted Solution

by:Mahesh
Mahesh earned 250 total points (awarded by participants)
ID: 41759864
If you have applications published on RDS for internet users, you need to publish RD web on internet
To do above scenario securely, you also need to publish RD gateway server on internet and tell RD web to route request through RD gateway
Check below link
https://ryanmangansitblog.com/2013/08/07/configure-connect-to-a-remote-computer-in-rdweb-2012/

You may publish RD gateway and Rd web on same server if your security policy allows, this will save one public IP for you
Because I don't see any requirement to publish RDCB on internet just because RD web is also installed on same server
You do need two host (A) records in public DNS pointing to same server

Note that RD web tries to access RD connection broker 1st - either from internal and external network
when from external network, requests are routed through RD gateway

You do require dns records for RD web, RD gateway, RD connection broker and RDSH servers in internal DNS server
Follow below article to configure RDGW
http://c-nergy.be/blog/?p=5290
Ensure RDGW is configured to bypass local addresses
0
 
LVL 37

Accepted Solution

by:
ArneLovius earned 250 total points (awarded by participants)
ID: 41762262
RD-WEB provides a way to download the .rdp file
RD-Gateway provides an RDP "proxy" for an external client to reach the CB and the SH

When you add a RD-Gateway to teh farm, it "automagically" configures RD-Web to "publish" .rdp files that include the gateway.
0
 
LVL 37

Expert Comment

by:ArneLovius
ID: 41787472
question abandoned, but answers are valid
0

Featured Post

Free NetCrunch network monitor licenses!

Only on Experts-Exchange: Sign-up for a free-trial and we'll send you your permanent license!

Here is what you get: 30 Nodes | Unlimited Sensors | No Time Restrictions | Absolutely FREE!

Act now. This offer ends July 14, 2017.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I'll explain how to setup a Plex Media Server (https://plex.tv/) on a Redhat (Centos) 7 based NAS with screenshots to help those looking for assistance.  What is Plex? If you aren't familiar with Plex, it’s a DLNA media serv…
Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
This tutorial will walk an individual through the process of transferring the five major, necessary Active Directory Roles, commonly referred to as the FSMO roles from a Windows Server 2008 domain controller to a Windows Server 2012 domain controlle…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

688 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question