ASA 5506x

Posted on 2016-08-18
Last Modified: 2016-08-25
I have 4 ASA 5506's, is it possible to setup one and saved the config file and then upload to the rest of the ASA5506's?
Question by:mwauki
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 3
LVL 29

Expert Comment

by:Jan Springer
ID: 41762411
If by "upload" you mean tftp/ftp/scp and they're on the same network, you will need to provide a different WAN interface IP for each device unless that tftp/ftp/scp server is a laptop to which the 5506 is directly connected.

Author Comment

ID: 41763431
upload via asdm.
LVL 29

Expert Comment

by:Jan Springer
ID: 41763632
If it's locally connected to the same network as the production unit, you will need to give each unit its own WAN IP.
Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!


Author Comment

ID: 41764099
thanks... am working with dynamic and static ips given by isp.... thanks for the confirmation...

so with the pppoe, all i have to change is the pppoe credentials, right?  is there a way to confirm that it would work before bringing to the designated sites?
LVL 29

Accepted Solution

Jan Springer earned 500 total points
ID: 41764406
If you are configuring devices that will be used at other locations, you should configure each based upon the location information.  As far as verifying the information, you can configure a laptop with the pppoe information and hook it up direct.

Author Closing Comment

ID: 41770557
thank you!

Featured Post

Visualize your virtual and backup environments

Create well-organized and polished visualizations of your virtual and backup environments when planning VMware vSphere, Microsoft Hyper-V or Veeam deployments. It helps you to gain better visibility and valuable business insights.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco RV042G 4 27
WLC and radius 4 49
Turning Verizon Fios Router into a Bridge? 28 134
CTIOS error on Windows 10 3 64
This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question