Solved

Get Error 0x80070035, Network Path was not found, when connecting to Windows 7 Shares

Posted on 2016-08-19
4
105 Views
Last Modified: 2016-08-27
Windows 7 is a member of the domain.  At boot, this netlogon event is recorded.
Log Name:      System
Source:        NETLOGON
Date:          8/19/2016 4:18:24 PM
Event ID:      5719
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      PC.domain.local
Description:
This computer was not able to set up a secure session with a domain controller in domain DEKA due to the following:
There are currently no logon servers available to service the logon request.
This may lead to authentication problems. Make sure that this computer is connected to the network. If the problem persists, please contact your domain administrator.  

ADDITIONAL INFO
If this computer is a domain controller for the specified domain, it sets up the secure session to the primary domain controller emulator in the specified domain. Otherwise, this computer sets up the secure session to any domain controller in the specified domain.

The PC properly authenticates to the DC.  It DNS records A & PTR are properly added to DNS (ad integrated zone).  Users can successfully log on and use the computer.  I am thinking that the NETLOGON event is a timing issue.

Manually running gpupdate /force generates these two events.
Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          8/19/2016 5:44:29 PM
Event ID:      1096
Task Category: None
Level:         Error
Keywords:      
User:          dom\dahuser
Computer:      PC.deka.local
Description:
The processing of Group Policy failed. Windows could not apply the registry-based policy settings for the Group Policy object LDAP://CN=User,cn={FCB841B3-21C8-4A88-89A2},cn=policies,cn=system,DC=domain,DC=local. Group Policy settings will not be resolved until this event is resolved. View the event details for more information on the file name and path that caused the failure.

=====

Log Name:      System
Source:        Microsoft-Windows-GroupPolicy
Date:          8/19/2016 5:44:29 PM
Event ID:      1112
Task Category: None
Level:         Warning
Keywords:      
User:          dom\dahuser
Computer:      PC.domain.local
Description:
The Group Policy Client Side Extension Folder Redirection was unable to apply one or more settings because the changes must be processed before system startup or user logon. The system will wait for Group Policy processing to finish completely before the next startup or logon for this user, and this may result in slow startup and boot performance.

These are the two symptoms of this issue
1.  Connections to the pc's shares (admin nor regular share) fail.  Error 0x80070035 is returned when connecting using either the computer name name or IP address.

2.  From the domain controller, attempting to manage the computer fails.   Error 0x80070035 is the error again.

Things checked.
1.  IP address settings - subnet mask/gateway/dns settings are correct.  Under wins NetBIOS over tcp is on.
2.  All firewalls are off by group policy.
3.  No antivirus programs.
4.  Both Domain controllers can ping the pc and the pc can ping both domain controllers.
5.  pc can ping the domain by name - domain.local
6.  My pc can ping the pc with the issue.
7.  PC was removed from the domain, rebooted  and then added it back to the domain.  Then it was reboot several more times.

In the domain this is the only PC displaying this issue.  

Thanks
0
Comment
Question by:epmmis
  • 2
4 Comments
 
LVL 94

Assisted Solution

by:John Hurst
John Hurst earned 250 total points
ID: 41763222
Try System File Checker first. Open cmd.exe with Run As Administrator and run SFC /SCANNOW. Close out, restart and test. This may not work.

If no, run a Windows 7 Repair Install. You need the Windows 7 DVD for this. Here is a Seven Forums Tutorial to assist.

http://www.sevenforums.com/tutorials/681-startup-repair.html
0
 
LVL 1

Assisted Solution

by:saumik belel
saumik belel earned 250 total points
ID: 41763661
-- Kindly take a look at the below document, hope it helps.

https://support.microsoft.com/en-in/kb/938449
0
 

Accepted Solution

by:
epmmis earned 0 total points
ID: 41765845
I was wrong about the firewall.  There is a new internal firewall blocking port 445.

Thanks for your help.
1
 

Author Closing Comment

by:epmmis
ID: 41772829
It was the correct one.
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article runs through the process of deploying a single EXE application selectively to a group of user.
In-place Upgrading Dirsync to Azure AD Connect
This Micro Tutorial will give you a introduction in two parts how to utilize Windows Live Movie Maker to its maximum capability. This will be demonstrated using Windows Live Movie Maker on Windows 7 operating system.
This Micro Tutorial hows how you can integrate  Mac OSX to a Windows Active Directory Domain. Apple has made it easy to allow users to bind their macs to a windows domain with relative ease. The following video show how to bind OSX Mavericks to …

820 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question