Link to home
Start Free TrialLog in
Avatar of Mike Clark
Mike Clark

asked on

PBX conversion

The office has an old PBX system on the wall near the 66 B block. I need to disconnect and discard the PBX box and hook the internal lines directly to the B block. There are four lines installed on the block. The PBX has 9 four pair wires punched down on the right side of the block -the internal lines are punched down on the left side. Do I just need to install bridge clips and pull the four pair lines off the block?
SOLUTION
Avatar of Alexandre Michel
Alexandre Michel
Flag of Australia image

Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Yes, some pictures would be great, I don't think bridge clips will work, maybe some jumpers.

You need approval in Australia to change your phone wiring inside your building?  That sucks, or are you just referring to the telco side?
ASKER CERTIFIED SOLUTION
Link to home
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Start Free Trial
Question answered