Dashboard Camera copying files to PC (SD Card)
I recently got a dash camera (Uniden iWitness DCAM). It connects to my PC with the supplied micro USB cable so I can power up the unit. But in order to transfer the video files from the camera, I have to connect the cameras SDCard to the computer. Does anyone know if you can get this to work without having to remove the SDCard. I didn't notice in the user manual regarding changing a setting on the camera. Thanks for any info.
Darrell Porter
Have you downloaded the software using this link?
If this doesn't work, please provide the specific model of Uniden iWitness DCAM since there are currently 9 different models.
ASKER
Thanks for the reply. I installed the software with the link you provided. I clicked on the button to browse to files but still having the same issue, when I plug the camera directly into my computer, the unit does not get recognized -- there is no drive that gets added when I view under the "Computer" area that displays drives. However I am able to see the power on the unit when I plug it into my PC, so I know it is connected ok.
I looked on the box and it says Uniden iWitness DCam. On the bottom of the dash camera, it says MODEL: DCAM.
I looked on the box and it says Uniden iWitness DCam. On the bottom of the dash camera, it says MODEL: DCAM.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I am going to close this out, I figured it might be a setting on the camera and haven't been able to resolve. I will post again if I have chance. Thanks for the help
ASKER
I got a chance to plug in the camera I don't see it listed under devices. However when I remove the SDCard and plug it into the computer it reads ok. It would be much easier if I could do this without having to remove the card.