Solved

Exsi lab

Posted on 2016-08-28
1
69 Views
Last Modified: 2016-09-04
I setup the exsi in our company and I would like to setup the lab environment to allow staff to access. In the exsi ,I had install pfSense to control the traffic and the WAN actually is our internal IP address 10.0.0.253 and the LAN IP is 192.168.0.1

I would like to know, how to configure the route for our staff connected in our office network able to access access the lab machine.

I Know I can allocate one LAN IP and WAN IP(Office Network) to access virtual machine. But I want to achieve is office user 10.0.0.1 able to reach 192.168.0.1

our office is using ASA 5510 and the IP Address is 10.0.0.1
0
Comment
Question by:YaYangTeah
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 62

Accepted Solution

by:
gheist earned 500 total points
ID: 41774494
You need a router to route between 2 networks.
ASA can do, just add new zone with new vlan and new subnet and configure switches to match.
0

Featured Post

Put Machine Learning to Work--Protect Your Clients

Machine learning means Smarter Cybersecurity™ Solutions.
As technology continues to advance, managing and analyzing massive data sets just can’t be accomplished by humans alone. It requires huge amounts of memory and storage, as well as the high-speed power of the cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I will show you HOW TO: Perform a Physical to Virtual (P2V) Conversion the easy way from a computer backup (image).
Examines three attack vectors, specifically, the different types of malware used in malicious attacks, web application attacks, and finally, network based attacks.  Concludes by examining the means of securing and protecting critical systems and inf…
Teach the user how to use configure the vCenter Server storage filters Open vSphere Web Client:  Navigate to vCenter Server Advanced Settings: Add the four vCenter Server storage filters: Review the advanced settings: Modify the values of the four v…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

751 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question