Solved

AnyConnect to 3rd vpn site

Posted on 2016-09-01
4
65 Views
Last Modified: 2016-09-06
i have 3 sites: a,b,c

siteA vpn into siteB.  siteB vpn to siteC

siteB has anyconnect vpn.  I want to have anyconnect to be able to access siteC.  

please a step by step would be great in accomplishing this.
cli or asdm is ok.

thanks,
0
Comment
Question by:mwauki
  • 2
  • 2
4 Comments
 
LVL 57

Accepted Solution

by:
Pete Long earned 500 total points
ID: 41781206
You need to hairpin :)

Cisco Firewall VPN “Hair Pinning” Note: Cisco refer to this as a “Spoke to Spoke VPN”

Obviously you will need to do this twice, once from B to A and once from B to C but the principle is identical.

Pete
0
 

Author Comment

by:mwauki
ID: 41783279
thanks PeteLong!

i think i specified my intention alittle too much and not clear?

what i really wanted to do is,  an anyconnect on siteB, to access devices on siteC.

also, do you have something on asdm as well just for flexibility?

much appreciated...
0
 
LVL 57

Expert Comment

by:Pete Long
ID: 41784820
No I understood :)

Simply hairpin the two together - Sorry I don't use the ASDM, Id never get anything done!!

Pete
0
 

Author Comment

by:mwauki
ID: 41786780
Thank you, Sir Pete!
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
For months I had no idea how to 'discover' the IP address of the other end of a link (without asking someone who knows), and it drove me batty. Think about it. You can't use Cisco Discovery Protocol (CDP) because it's not implemented on the ASAs.…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

816 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now