Cylinder Head Right or Left

Can you please tell me just by looking at it if its a right side or for the left side?
2000 Ford Expedition 5.4 4WD XLT

screenshot.jpgscreenshot2.jpgscreenshot3.jpgscreenshot4.jpg
mustish1Asked:
Who is Participating?
 
JohnBusiness Consultant (Owner)Commented:
OK. Nevertheless all the information you need is above. Good luck.
0
 
JohnBusiness Consultant (Owner)Commented:
According to this article below, Ford stamps RF on the casting, but I cannot see that in your screen shots. Do you have other pictures.

http://www.americancylinderheads.com/faq.php
0
 
mustish1Author Commented:
There is some information i found it.
pic2.jpgpic3.jpgpic4.jpg
0
Protect Your Employees from Wi-Fi Threats

As Wi-Fi growth and popularity continues to climb, not everyone understands the risks that come with connecting to public Wi-Fi or even offering Wi-Fi to employees, visitors and guests. Download the resource kit to make sure your safe wherever business takes you!

 
JohnBusiness Consultant (Owner)Commented:
It is the Right Front - down at the bottom of the last shots.  "RF"
0
 
mustish1Author Commented:
My vehicle issue was cylinder 2 and I need to change the whole piece. So just want to make sure that cylinder 2 is on the right side or the driver side.
0
 
JohnBusiness Consultant (Owner)Commented:
Quote (and I knew) "The right and left sides of an automobile or the engine are determined facing forward from rear of car or as from the point of view of being seated inside the car, facing the front (ie, from the driver's seat). Passenger side = Right side (We drive on the Right side of the road."  

So the head above is on the passengers side.
0
 
mustish1Author Commented:
Cylinder 2 is on driver side or the passenger side?
0
 
JohnBusiness Consultant (Owner)Commented:
Look down this Wiki article

https://en.wikipedia.org/wiki/Firing_order

Quote:  "Ford V8 engines cylinders 1-2-3-4 are on the right hand side of the car, with 5-6-7-8 are on the left."

DO check with a mechanic before spending money.
0
 
mustish1Author Commented:
I already bought it pay 150 used and the machine shop charge me 120.
0
 
mustish1Author Commented:
Thank You.
0
 
JohnBusiness Consultant (Owner)Commented:
You are very welcome and I do offer you my good wishes for fixing your engine.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.