Solved

server internet

Posted on 2016-09-05
5
32 Views
Last Modified: 2016-09-24
actually a gsm/gprs server is connect with the internet of sim card
and i want to access that server from anywhere but i am unable to communicate even i have the public ip and port number of that server .
someone say the apn of the sim is shared that why it can create some problem
is there any solution to access the server
0
Comment
Question by:gaurav kumar
5 Comments
 
LVL 9

Expert Comment

by:Tomas Valenta
ID: 41784772
What operating system you have on this server ?
0
 
LVL 13

Assisted Solution

by:Andy M
Andy M earned 250 total points (awarded by participants)
ID: 41784853
Sim Card (3G/4G Dongles) use shared public IP's so you can't have direct connections into them to sue RDP, VPN, SMTP, Web, etc (we found this out when a client removed his internet landline and tried to run his email server on a 4G dongle).

You'd need some sort of 3rd party remote control software to be able to access it remotely - something like Teamviewer, GoToAssist, etc that you can setup as a service to allow you to dial into it.
1
 
LVL 20

Expert Comment

by:CompProbSolv
ID: 41784978
If the issue is how to identify the public IP when it is dynamic, inexpensive services such as DynDns.org can resolve that.
0
 
LVL 41

Accepted Solution

by:
Jackie Man earned 250 total points (awarded by participants)
ID: 41785580
Normally, mobile operators will restrict the usage in the use case of a server as it is very likely that your server will lead to network congestion for other customers.

For example, the WIRELESS CUSTOMER AGREEMENT of AT&T reads as follows:-

AT&T's wireless data services may not be used in any manner that has the effect of excessively contributing to network congestion, hindering other customers' access to the network, or degrading network performance by maintaining a sustained and continuous wireless data service connection or active wireless Internet connection. For example, this includes, but is not limited to, server devices or host computer applications such as continuous Web camera posts or broadcasts, automatic data feeds, or automated machine-to-machine connections; "auto-responders," "cancel-bots," or similar automated or manual routines that generate excessive amounts of traffic or that disrupt user groups or email use by others; use of the service as a substitute or backup for private lines or full-time or dedicated data connections; peer-to-peer (P2P) file sharing services; and software or other devices that maintain continuous active Internet connections when a connection would otherwise be idle or any "keep alive" functions, unless they adhere to AT&T data retry requirements (as may be modified from time to time).

Source: https://m.att.com/shopmobile/legal/terms.wirelessCustomerAgreement.html

In short, you need to contact the mobile operator and pay for a high fee for data retry requirements so as to remove the restriction. But, if your 3G/4G subscription is billed on a flat rate, your mobile operator will NOT entertain you for sure, Besides, I do not think that you can get passed the restriction from your mobile operator and  such discussions are prohibited in this forum.
0
 
LVL 41

Expert Comment

by:Jackie Man
ID: 41813590
Information should be valid for solving this question.
0

Featured Post

VMware Disaster Recovery and Data Protection

In this expert guide, you’ll learn about the components of a Modern Data Center. You will use cases for the value-added capabilities of Veeam®, including combining backup and replication for VMware disaster recovery and using replication for data center migration.

Join & Write a Comment

Suggested Solutions

Need WiFi? Often, there are perfectly good networks that don't have WiFi capability - and there's a need to add it.  - Perhaps you have an Ethernet port into a network but no WiFi nearby. - Perhaps you have a powerline extender and no WiFi at the…
For Sennheiser, comfort, quality and security are high priority areas. This paper addresses the security of Bluetooth technology and the supplementary security that Sennheiser’s Contact Center and Office (CC&O) headsets provide.  
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

757 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now