Solved

How to route all traffic from three ISP Routers to a Cloud based router.

Posted on 2016-09-06
2
72 Views
Last Modified: 2016-09-27
I have a problem with some advanced routing.  And although I passed my TCP/IP training courses, it was many years ago....  

What I need to achieve.  I have a hotel, not actually mine, they have a number of Access Points, all different brands. These access points are connected to the internet via ISP provided Fiber Optic Routers.  What we want to do is that all traffic from these three routes is "routed" via a single upstream, cloud based router.  

This cloud based router will provide hotspot access control, as well as other logging services.

Can someone please remind me how to perform this upstream routing.

Thanks
0
Comment
Question by:townsma
2 Comments
 
LVL 16

Accepted Solution

by:
Shaik M. Sajid earned 500 total points
ID: 41785930
i don't think so that cloud routers could be useful in your scenario at this time as you have already this time access points which are not having features supports cloud enabled access point.

is this regard if you want to make it then you have to look for similar the following link
https://www.tanaza.com/project/powercloud-enable-cap324/

if you want to manage existing environment then you can check the following similar etc. to control all access points from one location.

https://www.netgear.com/business/products/wireless/wireless-management/?cid=wmt_netgear_organic

all the best
0
 
LVL 6

Author Comment

by:townsma
ID: 41792196
We looked at Tanaza, but they charge per AP, and as we have over 70 APs it is not commercially viable.

With regards to the NetGear solution, we are not looking to replace any existing gear.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question