asked on
H3C switch backup startup config
I am not familiar with H3C switch and would like to ask someone for help on how to login and backup startup config.
I was able to connect thru console port with my laptop and then tried with Cisco IOS command, e.g. enable for privilege mode but did not work.
I was able to connect thru console port with my laptop and then tried with Cisco IOS command, e.g. enable for privilege mode but did not work.
Switches / HubsNetworkingNetwork Management
Last Comment
techy98
ASKER
Many Thanks Predrag! it's helpful and I can reference to Cisco IOS command. Before I close this question, could you please help one more thing on reviewing the following?
In H3C, I simply want to backup config by copy and paste to a notepad as text file.
>system-view
>display current-configuration
Once output all config detail, I can just copy and paste to a text file, named H3CSWbackup.txt.
In case i need to restore, I can just paste the config back to the switch under system-view mode, correct?
In H3C, I simply want to backup config by copy and paste to a notepad as text file.
>system-view
>display current-configuration
Once output all config detail, I can just copy and paste to a text file, named H3CSWbackup.txt.
In case i need to restore, I can just paste the config back to the switch under system-view mode, correct?
ASKER CERTIFIED SOLUTION
THIS SOLUTION ONLY AVAILABLE TO MEMBERS.
View this solution by signing up for a free trial.
Members can start a 7-Day free trial and enjoy unlimited access to the platform.
ASKER
yes ageed. copy and paste will be just last option. appreciated.
H3C is Comware 5