Solved

PXE Boot broken on remote site SCCM after Main site restored from a backup?

Posted on 2016-09-07
4
13 Views
Last Modified: 2016-09-14
We had an issue with loading drivers in SCCM and decided to restore the main site from a backup before the driver issue occurred.  Now PXE boot is not working on remote sites as the configuration manager cannot locate a policy?
PXE-error.JPG
0
Comment
Question by:Yodathejedinight
  • 3
4 Comments
 

Author Comment

by:Yodathejedinight
ID: 41789389
Anyone? I have not yet found a solution if there is any ideas on this board or if you require more info please help!
0
 
LVL 17

Expert Comment

by:Mike T
ID: 41789415
Hi,

Are you familiar with CMTrace and the many different log files? If not, you really need to get familiar. You can't hope to run ConfigMgr without knowing these as basics.

The log for PXE is  SMSPXE.log.

AbortPXE

TFTP Download: smsboot\x64\abortpxe.com
PXE Boot aborted. Booting to next device...

Shows that your PXE Service Point and WDS are both installed and configured fine and are working as expected.

The error means your OSD deployment (i.e. your Task Sequence) is not found for the PC that is being PXE booted. The log file will show this.
The PXE Service Point is just doing what it ought to because this machine has "nothing to do" and gets a PXE abort.

Check the deployment settings. If you look in the SMSPXE.log it is probably showing the line:

ProcessDatabaseReply: No Advertisement found in Db for device smspxe

Open in new window


Solution: Create a new deployment for the machine.

You mention *remote sites* don't work. Does OSD work fine locally then?

Mike
1
 

Accepted Solution

by:
Yodathejedinight earned 0 total points
ID: 41791414
We ended up rebuilding the entire deployment front to back and that fixed the issue.  Thanks for your input Mike!
0
 

Author Closing Comment

by:Yodathejedinight
ID: 41797513
Not too much input from community and could not wait any longer.  Had to get the system up and running again.
0

Featured Post

Free Tool: Subnet Calculator

The subnet calculator helps you design networks by taking an IP address and network mask and returning information such as network, broadcast address, and host range.

One of a set of tools we're offering as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

The following article is intended as a guide to using PowerShell as a more versatile and reliable form of application detection in SCCM.
Binary Differential Replication, What it is, how it works and how it differs from standard delta file replication

685 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question