Solved

Solution on routin email traffic based on the domain

Posted on 2016-09-14
11
61 Views
Last Modified: 2016-09-18
Is it possible to setup IIS on Window 2012 / Window 10 such that if the domain come from a predefine list, it will route to device A, otherwise, it will route to device B.

Thx
0
Comment
Question by:AXISHK
  • 6
  • 5
11 Comments
 
LVL 37

Expert Comment

by:bbao
ID: 41799250
> it will route to device A, otherwise, it will route to device B.

just clarify, do you mean to route the RETURN traffic from IIS to the client via selected gateway (device A or B) ? say if the incoming traffic is from another router (e.g. device C)?

can you please also advise why Email Servers and Email Protocols are also tagged for this question?
0
 

Author Comment

by:AXISHK
ID: 41799253
We want incoming emails from several domain will not be scanned through our antispam gateway and go to our Exchange directly while others will be scanned by it first.

Thx
0
 
LVL 37

Expert Comment

by:bbao
ID: 41799259
if so why not simply change the specific domains' MX records directly pointed to the Exchange box? there is no thing to change on your site this way. only need to modify the MX records on the domains' external DNS server(s).
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 

Author Comment

by:AXISHK
ID: 41799271
Incoming emails from internet may be coming from different domain, say abc.com, ghi.com, xyz.com,

Any email from abc.com will to directly to Exchange server. ghi.com and xyz.com will go to our antispam gateway before routing to Exchange.

I guess it can't be setup in our MX record to take care of outside mail domain (not belong to us).
0
 
LVL 37

Expert Comment

by:bbao
ID: 41799299
> incoming emails from several domain

my bad, i misread as "incoming emails to several domain", sorry please forget my comment above.
0
 
LVL 37

Expert Comment

by:bbao
ID: 41799317
if so, the incoming email traffic splitting should be BEST done by your antispam gateway.  the other approach is any content filtering capable router or gateway in front of the antispam gateway, if available.

what's the product name and model of your antispam gateway please?
0
 

Author Comment

by:AXISHK
ID: 41799326
IMSVA
0
 
LVL 37

Expert Comment

by:bbao
ID: 41799340
9.0?
0
 

Author Comment

by:AXISHK
ID: 41800029
yes
0
 
LVL 37

Accepted Solution

by:
bbao earned 500 total points
ID: 41800842
according to IMSVA 9.0 Administrator's Guide downloaded from here., it can be done.

Page 9-7


Step 2: Configuring Condition Settings
Approved and Blocked Senders
Messages from Approved Senders are able to bypass the Email Reputation service and antispam filters, while messages from Blocked Senders are prevented from reaching recipients.
Specifying an IP address will block or approve all messages from that IP address.

see page 9-9 for "Step 2: Specify Sender conditions screen".
0
 

Author Closing Comment

by:AXISHK
ID: 41804174
Thx
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

OfficeMate Freezes on login or does not load after login credentials are input.
Phishing attempts can come in all forms, shapes and sizes. No matter how familiar you think you are with them, always remember to take extra precaution when opening an email with attachments or links.
To show how to create a transport rule in Exchange 2013. We show this process by using the Exchange Admin Center. Log into Exchange Admin Center.: First we need to log into the Exchange Admin Center. Navigate to the Mail Flow >> Rules tab.:  To cr…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

840 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question