asked on

SSH on Cisco switch Catalyst 2960-48TT-L

Hi Experts,

Can you please guide me I have cisco catalyst 2960-48TTL-L and want to configure it for SSH login.

The ios image on it is LABbase but not sure if it supports SSH.

Do you know if the image can be upgraded to K?

Thanks,

SIM50

You need to download k9 image. Go to Cisco site, downloads, look for 2960 and download this image: c2960-lanbasek9-mz.122-55.SE11.bin or w/e your version is. Upload it to your switch, in conf t do
boot system flash:/c2960-lanbasek9-mz.122-55.SE11.bin
wr
reload

Predrag Jovic

I don't remember that I run onto Cisco switch that does not support ssh (at least last 5 years).
:)
Steps to configure ssh.

smart Z

ASKER

How to upload the new bin file to the switch. I have the TFTP server installed on my laptop.

SOLUTION

SIM50

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

smart Z

ASKER

Hi SIM40,

Once I copy it to the flash, do I need to do this step boot system flash:/c2960-lanbasek9-mz.122-55.SE11.bin

SOLUTION

Predrag Jovic

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

ASKER CERTIFIED SOLUTION

SIM50

membership

This solution is only available to members.

To access this solution, you must be a member of Experts Exchange.

Start Free Trial

Predrag Jovic

If I remember correctly / should be there if you point to directory like
boot system flash:/IOS_15/c2960-lanbasek9-mz.122-55.SE11.bin
But for IOS in root of the flash i never used it, but I will try it anyway. :(|)