HP VC Flex-10 Enet Module /w external DL380 server

I have a C7000 blade system with an HP VC Flex-10 Enet Module connected to our Cisco Core. I have a DL380 Gen9 with a HP FlexFabric 10Gb 2-port 534FLR-SFP+ Adapter and DAC cables.  It also have a 4 port 331i adapter.  Should I be able to connect the DL380 via the HP VC Flex-10 Enet Module?
LVL 1
BALITWPGAsked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Craig BeckCommented:
You can connect the DL380 directly to the Flex-10 card, but it'd be better to connect it to the same switch that the Flex-10 card connects to, unless you need a direct connection to a particular blade in the chassis or you don't have the correct interfaces at your core.

It really depends on what you need to achieve though.
1

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
BALITWPGAuthor Commented:
I asked HP tech support the same question and they left a voice mail saying 'nope'.  I can connect directly to my core like you stated.  Thanks.
0
BALITWPGAuthor Commented:
no comment
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Networking

From novice to tech pro — start learning today.