?
Solved

hyperv question about connectivity

Posted on 2016-09-18
4
Medium Priority
?
99 Views
Last Modified: 2016-09-19
hi all. have moved vm lab to Hyperv but having a few issues, see other question raised. hers my setup.
2x physical servers.
server 1 ip address 192.168.0.150
server 2 ip address 192.168.0.151

I have 2 vms on each node with ip addresses 152,153,154,155. so all on same subnet.
my virgin router 19w.168.0.1
the GW address on all vms is 192.168.0.1

vSwitch called external  is bridged to physical Nic, same for both. all vms have been assigned external switch.
each vm can ping the other inside there own hyperv but they cannot ping the vms in the other node nor can any of them get Internet, get exclamation saying no Internet

I know I'm making a simple mistake here and am hoping that an expert can put me on the right track.
thank you.
0
Comment
Question by:Jason Thomas
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
4 Comments
 
LVL 11

Accepted Solution

by:
Richardson Porto earned 2000 total points
ID: 41804011
You use VLAN in your network? The router is connected on the same physical switch where your hosts are connected?
0
 
LVL 1

Author Comment

by:Jason Thomas
ID: 41804047
Yes so everything is on 192.168.0.x network.
0
 
LVL 1

Author Comment

by:Jason Thomas
ID: 41804321
been thinking. I could understand why the vms can't talk across the nodes possibly but why can't they get access to the Internet?
0
 
LVL 1

Author Closing Comment

by:Jason Thomas
ID: 41804599
Hi Richard. Got it all working. You mention of the switch got me to check the vswitch on the host, the vswitch didn't have correct GW and so rectified. Cost me more than a couple of hours but to be honest have learnt an awful lot in the trouble shooting so all's good. Thank you buddy.
0

Featured Post

The Eight Noble Truths of Backup and Recovery

How can IT departments tackle the challenges of a Big Data world? This white paper provides a roadmap to success and helps companies ensure that all their data is safe and secure, no matter if it resides on-premise with physical or virtual machines or in the cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
Optimized for private cloud infrastructures and datacenters, Nano Server is minimalistic, yet super-efficient, OS for services such as Hyper-V and Hyper-V cluster. Learn how you can easily deploy Nano Server and unlock its power!
Teach the user how to join ESXi hosts to Active Directory domains Open vSphere Client: Join ESXi host to AD domain: Verify ESXi computer account in AD: Configure permissions for domain user in ESXi: Test domain user login to ESXi host:
This Micro Tutorial walks you through using a remote console to access a server and install ESXi 5.1. This example is showing remote access and installation using a Dell server. The hypervisor is the very first component of your virtual infrastructu…
Suggested Courses

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question