Solved

Replacing redundant PSU on Dell PER720 server

Posted on 2016-09-19
2
14 Views
Last Modified: 2016-11-22
Hello friends,

Is it possible to replace a bad redundant PSU without bringing down the server?
0
Comment
Question by:Jeff Goldbort
2 Comments
 
LVL 11

Accepted Solution

by:
loftyworm earned 500 total points
ID: 41804931
I have done it a hundred times.  Pull out and put in.
That is understanding that it is REDUNDANT, has 2 plugs in the back and two PS
0
 

Author Closing Comment

by:Jeff Goldbort
ID: 41804943
Thank you.
0

Featured Post

NAS Cloud Backup Strategies

This article explains backup scenarios when using network storage. We review the so-called “3-2-1 strategy” and summarize the methods you can use to send NAS data to the cloud

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

INTRODUCTION The purpose of this document is to demonstrate the Installation and configuration, of the HP EVA 4400 SAN Storage. The name , IP and the WWN ID’s used here are not the real ones. ABOUT THE STORAGE For most of you reading this, you …
Moving your enterprise fax infrastructure from in-house fax machines and servers to the cloud makes sense — from both an efficiency and productivity standpoint. But does migrating to a cloud fax solution mean you will no longer be able to send or re…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

778 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question