Solved

SBS 2008 unable to backup since migration

Posted on 2016-09-24
1
86 Views
Last Modified: 2016-09-24
I have just moved VHD files from an old server to its replacement running 2012r2 server (hyper v). The server has 3 vhd files attached, data, exchange and the main OS (c:)

The move to the new server has been smooth, until I have attempted to run a backup. In the past I've never had issues with the backup, but currently it won't even start, failing almost instantly before it starts with error "The backup of the volume has stopped before it even started running"

The event log shows these error entries below.

Please note that if i run a once off manual backup and DO NOT select the C drive, the backup will start. As soon as the C drive is selected, the backup will fail immediately.

Any ideas would be greatly appreciated. thanks!

----------------------
Shadow copy creation failed because of error reported by ASR Writer. More info: The backup failed due to a missing disk for a dynamic volume. Please ensure the disk is online and retry the backup. (0x80042404).
 -------------------------
 
Volume Shadow Copy Service warning: ASR writer Error 0x80042404. hr = 0x00000000.
Operation:
PrepareForBackup event
PrepareForBackup event
Context:
Execution Context: ASR Writer
Execution Context: Writer
Writer Class Id: {be000cbe-11fe-4426-9c58-531aa6355fc4}
Writer Name: ASR Writer
Writer Instance ID: {17846e0f-d184-438f-ae25-800a59057a34}
 
 ---------------------
 
 
Backup started at '24/09/2016 1:19:18 PM' failed as Volume Shadow copy operation failed for backup volumes with following error code '2155348129'. Please rerun backup once issue is resolved.

--------------------------
0
Comment
Question by:Jamesm007
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 1

Accepted Solution

by:
Jamesm007 earned 0 total points
ID: 41813780
OK so updating the disk from basic to dynamic solved the problem for me. backup is now running!
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to fix error ""Failed to validate the vCentre certificate. Either install or verify the certificate by using the vSphere Data Protection Configuration utility" when you are trying to connect to VDP instance from Vcenter.
How to update Firmware and Bios in Dell Equalogic PS6000 Arrays and Hard Disks firmware update.
This tutorial will walk an individual through the process of installing of Data Protection Manager on a server running Windows Server 2012 R2, including the prerequisites. Microsoft .Net 3.5 is required. To install this feature, go to Server Manager…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…

728 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question