Solved

How to setup RD web access using dyndns server 2012 r2

Posted on 2016-09-24
20
76 Views
Last Modified: 2016-09-30
How to setup RD web access using dyndns server 2012 r2
0
Comment
Question by:Dan Dhillon
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 14
  • 6
20 Comments
 
LVL 7

Expert Comment

by:No More
ID: 41814217
Hi Dan,  

Could you tell me little bit more about your server setup ?
- Do you have hardware firewall ?
- Have you port-forwarding set up ?
- Is this company setup ?
- What type of service do you have from DynDns ?

DynDns is a service to keep your dynamic public IP address linked and updated to their website and your personal web link and it's all about settings, install of client on server,etc.
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814587
Hi David

Have firewall opened ports 80,3389 .. have a dyndns client installed on the server. I'm just learning built a lab to practice. How do I get a ssl certificate please? Or how can I get a self cert ?
Do I need one for all three connection broker?
Rd web access? and Rd gateway ?
thanks for your reply back.
0
 
LVL 7

Accepted Solution

by:
No More earned 500 total points
ID: 41814718
0
Transaction Monitoring Vs. Real User Monitoring

Synthetic Transaction Monitoring Vs. Real User Monitoring: When To Use Each Approach? In this article, we will discuss two major monitoring approaches: Synthetic Transaction and Real User Monitoring.

 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814721
Hi David,

thanks for your reply, I've tried everything in those links doesn't tell me how to access rd web access using dyndns?

thanks
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814722
Hi David,

thanks for your reply, I've tried everything in those links doesn't tell me how to access rd web access using dyndns?

thanks
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814724
David,

when I goto https://mydomain.dyndns.net internally I get "error unable to access rd web" externally I get nothing.
when I created certificates it said untrusted - ok. I can access rd web when I use https://internal-ip/rdweb.
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814725
David,

when I goto https://mydomain.dyndns.net internally I get "error unable to access rd web" externally I get nothing.
when I created certificates it said untrusted - ok. I can access rd web when I use https://internal-ip/rdweb.
0
 
LVL 7

Expert Comment

by:No More
ID: 41814750
Try https://<Your Public IP>/rdweb

What service do you have from DynsDns ? is it paid or free ?
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814754
David,

I have free dyndns service.
I don't have a static ip address, will https://ip address/rdweb.. Still work?

thanks
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814755
David,

I have free dyndns service.
I don't have a static ip address, will https://ip address/rdweb.. Still work?

thanks
0
 
LVL 7

Expert Comment

by:No More
ID: 41814766
It will if you have set up your port forwarding example:    

Public Port Range    7000-7000    
      
Target IP Address     192.168.0.201
      
Target Port Range    80
      
Protocol    both    TCP/UDP

Depends on your router and ISP
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814770
David,

do I need to open port 443,7000,80,3389 to the ip address will it work then? is that what you mean.

Thanks
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814771
David,

do I need to open port 443,7000,80,3389 to the ip address will it work then? is that what you mean.

Thanks
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814772
David,

do I need to open port 443,7000,80,3389 to the ip address will it work then? is that what you mean.

Thanks
0
 
LVL 7

Expert Comment

by:No More
ID: 41814787
Yes, but as I said it depends on your ISP what they allow you to do,

you can check it on http://www.portchecktool.com/

For example I have my Public IP with port 7000   targeting my private IP 192.168.0.201 port 3389   for remote desktop to my server

Also check port list https://social.technet.microsoft.com/wiki/contents/articles/16164.which-ports-are-used-by-a-rds-2012-deployment.aspx


Also remember that if you want to access it from outside you have use different internet connection
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814788
David,

I will try this tomorrow and report back to you.

many thanks 😃
0
 
LVL 7

Expert Comment

by:No More
ID: 41814790
If so I would suggest to have VNC or Teamviewer installed on your server for remote access
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814792
David,

I had solarwinds msp installed on the server but my stupid colleague did not renew the licence. So will check tomorrow and report back.

thanks
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814793
David,

I had solarwinds msp installed on the server but my stupid colleague did not renew the licence. So will check tomorrow and report back.

thanks
0
 
LVL 1

Author Comment

by:Dan Dhillon
ID: 41814798
David,

I just tried http://public-ip and I can get ms internet information services page. looks like something is working. checked to see if port 443 is opened seems like it's closed.

thanks
0

Featured Post

Does Powershell have you tied up in knots?

Managing Active Directory does not always have to be complicated.  If you are spending more time trying instead of doing, then it's time to look at something else. For nearly 20 years, AD admins around the world have used one tool for day-to-day AD management: Hyena. Discover why

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Recently, I was assigned the task of performing a hardware refresh in the datacenter. The previous Windows 2008 systems were connected to the SAN via fiber channel HBA’s and among other thing, had PowerPath installed in order to provide sufficient f…
The reason that corporations and businesses use Windows servers is because it supports custom modifications to adapt to the business and what it needs. Most individual users won’t need such powerful options. Here I’ll explain how you can enable Wind…
In this Micro Tutorial viewers will learn how to use Windows Server Backup to create full image of their system. Tutorial shows how to install Windows Server Backup Feature on Windows 2012R2 and how to configure scheduled Bare Metal Recovery backup.…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question