Solved

Configure QoS on Archer c9 running WR-DDT

Posted on 2016-10-06
2
78 Views
Last Modified: 2016-10-07
Hi,

We have flashed our TP Link Archer C9 with WR-DDT firmware and it's working great. We'd like to configure QoS for Fonailty service. Does anyone have good step by step instructions for doing this?

Thanks.
0
Comment
Question by:sio2y
2 Comments
 
LVL 77

Accepted Solution

by:
arnold earned 500 total points
ID: 41832851
Presumably you saw this, but here as reference http://help.fonality.com/TroubleshootingFAQ/Troubleshooting(old)/What_is_QoS_and_how_do_I_use_it%3f
The ports identified here are needed. Some might a,ready be defined, you would add each service and set it to a higher priority, while downgrading www/httpd or similar data  services on your pop, IMAP, etc normal or lower, while the other are higher.

What issues are you experience statering, echo?

You should reserve 10-15% of available bandwidth when setting the QoS on the wan side.
0
 

Author Comment

by:sio2y
ID: 41834071
I did not but it helped a lot. for anyone else that comes along please see the attached screenshot. Remember thought that the settings are specific to the TP link Archer C9 with wr-ddt firmware and 80% of the site bandwidth.

(we also turned off spi firewall)
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
This subject  of securing wireless devices conjures up visions of your PC or mobile phone connecting to the Internet through some hotspot at Starbucks. But it is so much more than that. Let’s look at the facts: devices#sthash.eoFY7dic.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question