Solved

Static MAC address entry on port when no Static entry defined.

Posted on 2016-10-11
2
46 Views
Last Modified: 2016-10-11
Hi
     We have configured port security on a port, for a conference room.  4 Mac addresses allowed.  The MAC addresses should show up as Dynamic, but are showing up as Static.  No sticky MAC is configured.  After the users have left the conf room the MACs still show up under the port.  I have cleared the entries by bouncing the inetrface.  Aging time is 0 mins, aging type absolute.

Any suggestions would be appreciated.


Regards

Shakoor
0
Comment
Question by:Mohammed Shakoor
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 14

Accepted Solution

by:
SIM50 earned 500 total points
ID: 41838429
Aging 0 means it never gets removed. If you want to be removed, you have to set the time above 0 in minutes.
1
 

Author Comment

by:Mohammed Shakoor
ID: 41838609
Thanks SIM50, thats what I changed to fix it.
0

Featured Post

On Demand Webinar: Networking for the Cloud Era

Ready to improve network connectivity? Watch this webinar to learn how SD-WANs and a one-click instant connect tool can boost provisions, deployment, and management of your cloud connection.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I see many questions here on Experts Exchange regarding switch port configurations and trunks. This article is meant for beginners in the subject to help to get basic knowledge about Virtual Local Area Network (VLAN (http://en.wikipedia.org/wiki/Vir…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
This is my first video review of Microsoft Bookings, I will be doing a part two with a bit more information, but wanted to get this out to you folks.
This tutorial will teach you the special effect of super speed similar to the fictional character Wally West aka "The Flash" After Shake : http://www.videocopilot.net/presets/after_shake/ All lightning effects with instructions : http://www.mediaf…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question