Solved

CCTV Installation - Networking

Posted on 2016-10-13
3
61 Views
Last Modified: 2016-10-17
Morning Experts,

I have a requirement to create a CCTV installation
The project consists of two remote locations and one central server room (see attached).
At each site will be a PoE swtich to power the cameras.  The issue is that the distance from the remote sites to the server room is 200 meters.

I am thinking of installing Ethernet to Fibre media convertors at either end of the swithces for the distance. Can anyone recommend what media converts to use and what type of fibre cable to use, any other suggestions for the above requirements would be welcomed.

Thanks in advance.
Topology1.jpeg
0
Comment
Question by:Rio_10
  • 2
3 Comments
 
LVL 10

Accepted Solution

by:
Muhammad Mulla earned 500 total points
ID: 41841498
One alternative may be to use a PoE ethernet extender at the 100m point. You already have PoE switches at your remote sites, so they could provide the power for it. Maybe something like this: http://www.veracityglobal.com/products/ethernet-and-poe-devices/outreach-lite.aspx
0
 

Author Comment

by:Rio_10
ID: 41843124
Thanks for the link, can we get such a device with Gigabit.
0
 
LVL 10

Expert Comment

by:Muhammad Mulla
ID: 41843685
Unfortunately, I'm not aware of any.
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Macbook Sierra OS OpenVPN issue 13 113
Solar Winds can't see SQL Server Express 17 33
Cisco Edge Routers for BGP 6 52
Changing Lease Duration for DHCP clients 34 35
#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
Even if you have implemented a Mobile Device Management solution company wide, it is a good idea to make sure you are taking into account all of the major risks to your electronic protected health information (ePHI).
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question