Solved

connect poe switch to non poe switch

Posted on 2016-10-13
3
76 Views
Last Modified: 2016-10-13
can i connect a poe switch to a non poe switch to an access point and have the power get to the access point?
0
Comment
Question by:stevekee65
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 29

Accepted Solution

by:
Predrag Jovic earned 500 total points
ID: 41841923
AP must be connected to POE switch. That is mandatory (if you want switch to provide power to AP).
You can connect POE and non POE switches without any problems.

If I understood you well - you want to connect AP to non POE switch and then connect non poe switch to poe switch. If my understanding is correct than  - No. It will not work.
However you can buy POE injector and that way provide power for AP. Typically minus side is that you can't remotely power cycle AP if you do not use POE switch.
0
 

Author Comment

by:stevekee65
ID: 41841941
ok, then can i connect a poe adapter to a non poe switch to an access point
0
 
LVL 29

Expert Comment

by:Predrag Jovic
ID: 41841954
That's it.
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question