Solved

Windwos Server 2012 R2 NPS for Cisco ASA VPN Authentication

Posted on 2016-10-17
2
80 Views
Last Modified: 2016-10-17
Hi...

I follow this guide http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/117641-config-asa-00.html to configure NPS for customer ASA VPN.

I can see there is an attempt to login and failed. I check the event log of NPS, it showing error code : 66. exactly from the guide I followed.
I did enable PAP authentication at VPN profile and NPS policies. still no can't works.

I read through few post, but don't see helping a lot.

anyone has additional info that I should check?

thanks
0
Comment
Question by:hell_angel
2 Comments
 
LVL 57

Accepted Solution

by:
Pete Long earned 500 total points
ID: 41847419
This is the method I use
Windows Server 2012 – Configure RADIUS for Cisco ASA 5500 Authentication

Its not failed me before?

P
0
 

Author Comment

by:hell_angel
ID: 41847647
Hi Pete...

thanks a lot.. it just works....
0

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
I recently attended Cisco Live! in Las Vegas, a conference that boasted over 28,000 techies in attendance, and a week of hands-on learning hosted by a solid partner with which Concerto goes to market.  Every year, Cisco displays cutting-edge technol…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question