Solved

Watchguard system manager list dhcp addresses

Posted on 2016-10-17
4
11 Views
Last Modified: 2016-11-14
Hi,

I have a watchguard box and I'm connecting to it through system manger (11.11.2). I have the box acting as the dhcp server.  Where can I find a list of ip addressees  that it has issued.

Thanks
0
Comment
Question by:GTTech2010
  • 2
  • 2
4 Comments
 
LVL 20

Assisted Solution

by:masnrock
masnrock earned 500 total points
Comment Utility
Since you haven't specified which Watchguard, I'm sineding you directions for the XTM:
http://watchguard.com/help/docs/webui/xtm_11/en-us/content/en-us/system_status/stats_dhcp_leases_web.html
0
 

Author Comment

by:GTTech2010
Comment Utility
Hi thanks but that link is for the web interface not the system manager application. I would like to find it in the system manger application so I don't have to use the web interface
0
 
LVL 20

Accepted Solution

by:
masnrock earned 500 total points
Comment Utility
Sadly, there isn't any good documentation for what you're asking for. That's what I've been trying to check for, and have literally found nothing.
0
 

Author Closing Comment

by:GTTech2010
Comment Utility
Thanks for trying
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

12 Experts available now in Live!

Get 1:1 Help Now