?
Solved

Mapping network drive with 'net use'

Posted on 2016-10-17
1
Medium Priority
?
74 Views
Last Modified: 2016-10-17
Is there a way to have a script map a network drive based on the current user logged in?
This would be similar to setting up a drive in an AD profile using the %username% wildcard.

I cannot use GPO to map this as it is designed for when they are off network.
0
Comment
Question by:jjwolven
1 Comment
 
LVL 72

Accepted Solution

by:
Qlemo earned 2000 total points
ID: 41846968
Yes, as long as you can code the relationship, you can build a batch file. You can use the username, for example:
net use h: \\server\users\%username%

Open in new window

0

Featured Post

Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this article, WatchGuard's Director of Security Strategy and Research Teri Radichel, takes a look at insider threats, the risk they can pose to your organization, and the best ways to defend against them.
In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…
Monitoring a network: how to monitor network services and why? Michael Kulchisky, MCSE, MCSA, MCP, VTSP, VSP, CCSP outlines the philosophy behind service monitoring and why a handshake validation is critical in network monitoring. Software utilized …
Suggested Courses

569 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question