Solved

Expansion of IP addressing using static addresses

Posted on 2016-10-19
1
52 Views
Last Modified: 2016-10-25
We have a network using static addressing (no DHCP) with addresses in the range 192.168.0.1 / 255.255.255.0

I do not have enough IP addresses for the new workstations I plan to add.

Without using DHCP, what is the best/easiest way to add the new workstations with addresses in the 192.168.1.1 - 192.168.1.254 range while allowing these new workstations to have full access to all devices with addresses on the 192.168.0.1 network ?
0
Comment
Question by:Fraserreid
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 83

Accepted Solution

by:
Dave Baldwin earned 500 total points
ID: 41850290
You have to change the network mask from 255.255.255.0 to 255.255.254.0 on ALL workstations.  If you don't, the ones with the old mask will not be able to communicate with the new ones and the 'broadcast' IPs will be different for the two groups.
0

Featured Post

Manage your data center from practically anywhere

The KN8164V features HD resolution of 1920 x 1200, FIPS 140-2 with level 1 security standards and virtual media transmissions at twice the speed. Built for reliability, the KN series provides local console and remote over IP access, ensuring 24/7 availability to all servers.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
Most of the applications these days are on Cloud. Cloud is ubiquitous with many service providers in the market. Since it has many benefits such as cost reduction, software updates, remote access, disaster recovery and much more.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.

733 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question