Eprs_Admin
asked on
JetStress 2013 failed
Hi Experts,
I have done a test for my EXCH2013 installation.
But this test failed.
See the picture.
What does the error mean ?
JetStress2013-error.JPG
I have done a test for my EXCH2013 installation.
But this test failed.
See the picture.
What does the error mean ?
JetStress2013-error.JPG
ASKER
ok but how can it be ?
It is a brand new system. from NUTANIX.
It is a brand new system. from NUTANIX.
That's what the test states!
and you asked what does it mean. that's what it means.
and you asked what does it mean. that's what it means.
ASKER
ok I will also check the other nodes and VMs
ASKER
all nodes have the same issue, tested with one DB or 2 DBs.
so despite the test, is service okay and performance fine with end users ?
ASKER
The support team told me to create one VMDK for each DB and LOG.
Do you agree ?
I did the test just with one DB and one LOG, each on an extra VMDK.
The test was successful.
Do you agree ?
I did the test just with one DB and one LOG, each on an extra VMDK.
The test was successful.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
ok tomorrow I create all the disks and test again with 3 DBs
ASKER
Which DISK mode is better for the VMDKs ?
Masterboot Record or GPT ?
Masterboot Record or GPT ?
SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
I created now for each DB location a seperate disk. And for each LOG location I also created a seperate disk.
I used for all GPT table.
I used for all GPT table.
you have high read and write latencies.