Solved

esxi multiple ip bind

Posted on 2016-10-25
5
46 Views
Last Modified: 2016-10-25
I'm moving an old hosting server with esxi 5.5 to a new host and Hostway said that I have to unbind all of my public ip address from the old host and bind them to the new host, can someone tell me where to I go to do that? I can only see the management IP address on NIC0.
0
Comment
Question by:jdff
  • 3
  • 2
5 Comments
 
LVL 119
ID: 41859365
That is correct, from the console, you can change the IP Address of the Management Interface.

Do you use any public IP Addresses in the individual Guest VMs because these may need changing as well.
0
 

Author Comment

by:jdff
ID: 41859390
Yes, I use public ip address for the guests, how do I unbind the public address from NIC0, the IP for the interface its I can do it but I don't see the block of IPs that needs to be unbind as they told me.
0
 

Author Comment

by:jdff
ID: 41859391
I'm confused.
0
 
LVL 119

Accepted Solution

by:
Andrew Hancock (VMware vExpert / EE MVE^2) earned 500 total points
ID: 41859402
Okay, all the public IP Addresses used in the Guest VMs, will need changing to something else, that's maybe what is meant by ubind.

As for the Host IP Address, you just change the IP Address, there is no function called unbind.

So you will need to replace the existing public IP Address, with a new IP Address, give to you by your Hosting company.

On ESXi there is no block of IP Addresses, that you unbind...

On the black over yellow console screen you hit F2 to login with root account and password.

Select Configure Management Network

Select IPv4 Configuration

Change the IP Address
0
 

Author Comment

by:jdff
ID: 41859404
Ok Andrew I think you are correct, they information provided by them is confusing. Will do so. Thank you very much.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this step by step tutorial with screenshots, we will show you HOW TO: Enable SSH Remote Access on a VMware vSphere Hypervisor 6.5 (ESXi 6.5). This is important if you need to enable SSH remote access for additional troubleshooting of the ESXi hos…
In this article, I will show you HOW TO: Suppress Configuration Issues and Warnings Alert displayed in Summary status for ESXi 6.5 after enabling SSH or ESXi Shell.
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…
This Micro Tutorial walks you through using a remote console to access a server and install ESXi 5.1. This example is showing remote access and installation using a Dell server. The hypervisor is the very first component of your virtual infrastructu…

786 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question