Solved

Cannot start vm in Hyper-V

Posted on 2016-10-26
18
88 Views
Last Modified: 2016-11-02
I was trying to start the virtual machine on Hyper-V but getting error belo.
"Failed to start the virtual machine"xxxxx" because one of the Hyper-v components is not working.

Thanks
0
Comment
Question by:dj 3094
  • 10
  • 8
18 Comments
 
LVL 7

Expert Comment

by:No More
ID: 41861301
Can you tell me what is your setup ?

Aren't you running this on Vmware workstation by the chance ?
0
 
LVL 6

Author Comment

by:dj 3094
ID: 41861305
Nope. We have created a Windows server 2012 on our network for testing WDS. Connected to that server through remote desktop connection and I have added the Hyper v on the server and created the virtual machine. Then i went to vm setting and added the ISO image. tried to start, got that error.
0
 
LVL 7

Expert Comment

by:No More
ID: 41861306
Can you check your BIOS settings and make sure that:  Virtualization / VT-x  is enabled,
0
PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

 
LVL 6

Author Comment

by:dj 3094
ID: 41861311
I have a question there too. I have to restart to go to BIOS settings right. When I restart it the remote desktop connection is closed, so how to check the bios settings.
0
 
LVL 7

Expert Comment

by:No More
ID: 41861315
You have to do this on server itself, you can't access bios unless you have IPMI management port on your server for network management

Basically you need to be in front of server with keyboard and monitor connected to it
0
 
LVL 6

Author Comment

by:dj 3094
ID: 41861317
The server is also is virtual server or not. I will check with Admin tomorrow and reply back, Thanks for the help.
0
 
LVL 7

Expert Comment

by:No More
ID: 41861320
No worry, You might be trying to run multiple hypervisors and if the system isn't set up for nested option and config you might run into these issue, but yeah would be better to check out with your admin
0
 
LVL 6

Author Comment

by:dj 3094
ID: 41861322
Sorry I have a question on MDT as well, could you help?
0
 
LVL 7

Expert Comment

by:No More
ID: 41861325
Yeah
0
 
LVL 6

Author Comment

by:dj 3094
ID: 41861329
So i just installed MDT on WDS server. We are planning to deploy windows 10 to all computer in the organization. As a test we are creating a test environment with windows 7 which we already have. So my question is how to add win 7 ISO image directly to deployment workbench and also what setting we have to do to assign pc name to be grabbed from asset tag. If that is a new machine MDT assign a name. Is that possible.
0
 
LVL 7

Assisted Solution

by:No More
No More earned 500 total points
ID: 41861338
This would be link for detailed information

https://technet.microsoft.com/en-us/itpro/windows/deploy/deploy-a-windows-10-image-using-mdt

WMI  would help you with that SELECT * FROM Win32_SystemEnclosure SMBIOSAssetTag

But I'm not 100% sure how it is in MDT, as I'm use to more WDS
0
 
LVL 6

Author Comment

by:dj 3094
ID: 41861341
So how can we do that in WDS, We are testing with both. Which is easy to deploy ?
0
 
LVL 7

Expert Comment

by:No More
ID: 41861378
You will pre-stage the computer in WDS computer list using mac address of computer NIC or GUID

This isn't simple task and you will have to do your studies, you can't learn this in one day

This includes Unattend.xml files with install configuration, but you need to watch some youtube guides
0
 
LVL 6

Author Comment

by:dj 3094
ID: 41861445
Ok thanks. Is there any way in MDT or WDS to boot the client computer other than PXE boot.
0
 
LVL 7

Expert Comment

by:No More
ID: 41861446
I don't think so PXE it's whole point of deployment unless you create ready image to DVD or usb and deploy system from it on the Computer directly
0
 
LVL 6

Author Comment

by:dj 3094
ID: 41861448
Please do suggest some material which can help me to accomplish this task. This whole deployment this is really confusing.
Thanks alot in advance.I am watching some youtube videos and learned the basics but they are deploying image on single virtual machine without naming convention.
We have around 1200 PC' on active directory.
0
 
LVL 7

Accepted Solution

by:
No More earned 500 total points
ID: 41861469
For MDT
https://www.packtpub.com/networking-and-servers/mastering-microsoft-deployment-toolkit
https://www.lynda.com/Microsoft-Deployment-Toolkit-training-tutorials/7824-0.html

In overall WDS training is included in MCSA: Windows Server 2012 R2 certification training

Microsoft Technet website has a lot of information

You will find most of important information in Microsoft books or any books related to Windows Server Management
1
 
LVL 7

Expert Comment

by:No More
ID: 41861471
I added link
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Hyper-V Cluster Shows Deprecated Server 11 46
Computer hardware speed units 9 57
Hyper-v migrate to new storage 1 31
Hyper-V 2012 Reverse replication of only one server 7 21
Exchange server is not supported in any cloud-hosted platform (other than Azure with Azure Premium Storage).
In a recent question (https://www.experts-exchange.com/questions/29004105/Run-AutoHotkey-script-directly-from-Notepad.html) here at Experts Exchange, a member asked how to run an AutoHotkey script (.AHK) directly from Notepad++ (aka NPP). This video…

789 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question