Solved

Error      DHCP: Credentials for DNS update should be configured if secure dynamic DNS update is enabled and the domain controller is on the same host as the DHCP server.      Configuration

Posted on 2016-10-31
2
67 Views
Last Modified: 2016-11-08
Good day EXPERTS, I am running Windows Server 2012 R2 and after running the built in BPA I receive the above error.  Can one of the EXPERTS shed some light on the issue...thanks.
0
Comment
Question by:PowerC280
2 Comments
 
LVL 62

Accepted Solution

by:
btan earned 500 total points
ID: 41867060
This issue is saying as the dynamic DNS service is turned on in the same host, there is need for for credentials for DNS update to be configured, otherwise DNS registrations will fail. You can check this out for details and remedy
To configure credentials for dynamic DNS update

Click Start, point to Administrative Tools and then click DHCP.
In the console tree, right-clickIPv4, and then click Properties
Click Advanced, click Credentials, type the credentials that the DHCP server supplies when registering names using DNS dynamic updates, and then click OK.
@ https://technet.microsoft.com/en-us/library/ee941181(v=ws.10).aspx
1
 

Author Closing Comment

by:PowerC280
ID: 41879761
This solution work perfectly for me.....thanks BTAN.
0

Featured Post

DevOps Toolchain Recommendations

Read this Gartner Research Note and discover how your IT organization can automate and optimize DevOps processes using a toolchain architecture.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Sometimes drives fill up and we don't know why.  If you don't understand the best way to use the tools available, you may end up being stumped as to why your drive says it's not full when you have no space left!  Here's how you can find out...
Resolve DNS query failed errors for Exchange
This tutorial will walk an individual through the process of configuring basic necessities in order to use the 2010 version of Data Protection Manager. These include storage, agents, and protection jobs. Launch Data Protection Manager from the deskt…
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

776 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question