Solved

Order of preference for routing protocol

Posted on 2016-10-31
1
52 Views
Last Modified: 2016-11-01
What's the order of selection when a router receive a route from static, direct connect and RIP ? Should the selection be direct connect over static and RIP ?

Thx
0
Comment
Question by:AXISHK
1 Comment
 
LVL 50

Accepted Solution

by:
Don Johnston earned 500 total points
ID: 41867190
Administrative Distance determines that.  AD can be changed but on the default AD's for Cisco routers, connected has an AD of zero which makes preferred over all others.

Static is 1 and RIP is 120.

So you are correct.
Connected
Static
RIP
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I had an issue with InstallShield not being able to use Computer Browser service on Windows Server 2012. Here is the solution I found.
This article will inform Clients about common and important expectations from the freelancers (Experts) who are looking at your Gig.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question