Solved

Nexus OS - OSPF Command

Posted on 2016-11-04
3
68 Views
Last Modified: 2016-11-06
I have Nexus 7K & it is running OSPF. One of the areas is the NSSA area & I have the below command for the OSPF NSSA area
What does this command represent in Nexus

  area 0.0.1.23 nssa no-summary default-information-originate
0
Comment
Question by:SrikantRajeev
  • 2
3 Comments
 
LVL 28

Accepted Solution

by:
Predrag Jovic earned 500 total points
ID: 41874157
area 0.0.1.23 nssa no-summary     <---- is configuring totaly nssa and it will advertise default route into area (if default route it is present in ABR's routing table)
default-information originate         <--- should advertise default route into area (if ABR does not have default route in its routing table)

So it looks like redundant
Default Summary Route


By defining an area as a NSSA totally stub area, the NSSA ABR generates a default summary route. As mentioned, if the NSSA area were not defined as totally stub, then a default summary route is not generated by NSSA ABR. This configuration generates a default summary route for a NSSA totally stub area.

    router ospf 1
     Area 1 nssa no-summary
However it will be two type of LSAs. The first default route will be type 3 LSA and the second one will be type 7 LSA. Type 3 is preferred, but type 7 will be created even if ABR does not have default route in it's routing table.

Cisco article - OSPF Not-So-Stubby Area (NSSA)
0
 
LVL 1

Author Comment

by:SrikantRajeev
ID: 41876195
got it thanks
0
 
LVL 1

Author Closing Comment

by:SrikantRajeev
ID: 41876197
Got it
Thanks
0

Featured Post

Portable, direct connect server access

The ATEN CV211 connects a laptop directly to any server allowing you instant access to perform data maintenance and local operations, for quick troubleshooting, updating, service and repair.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
DNS Server 7 60
Windows Server: configure snmp security to accept subnet 7 30
How to read network slash info 7 47
HP network exams 3 32
How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question