Solved

vpn with dynamic ip

Posted on 2016-11-10
3
16 Views
Last Modified: 2016-11-30
is there any performance issues for setting up a vpn using static ip versus using dynamic ip with dyndns? heard vpn does not work very well in the dyndns and normal off the shelf vpn routers cannot perform at 100 Mbps. Please share your experiences on using vpn with static or dynamic ip. Thanks!
0
Comment
Question by:grnow
  • 2
3 Comments
 
LVL 13

Accepted Solution

by:
SIM50 earned 250 total points (awarded by participants)
ID: 41882597
What brand of routers? For Cisco, there is a limit of 85Mbps each direction without a license (hsec). As for dynamic IP or not, doesn't make a difference.
0
 
LVL 26

Assisted Solution

by:akahan
akahan earned 250 total points (awarded by participants)
ID: 41883053
Dynamic vs. static IP will make absolutely zero difference once the connection has been established.  All that dynamic IP is doing is providing a means for the client to obtain the correct IP address for the VPN.  Once it's done so, connected is connected.

Don't expect any VPN to operate at the theoretical maximum speed for the connection.  Even when using VPN, your packets are traveling over the internet from router to router, through perhaps a half dozen or more routers, through congested traffic, and the speed will only be as fast as the slowest link in the chain will permit.
0
 
LVL 13

Expert Comment

by:SIM50
ID: 41907001
Answered.
0

Featured Post

Highfive Gives IT Their Time Back

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Suggested Solutions

In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
Quality of Service (QoS) options are nearly endless when it comes to networks today. This article is merely one example of how it can be handled in a hub-n-spoke design using a 3-tier configuration.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

757 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

19 Experts available now in Live!

Get 1:1 Help Now