Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

Changing external IP address on Cisco 1921 Router

Posted on 2016-11-16
1
Medium Priority
?
136 Views
Last Modified: 2016-11-16
Hi Guys,

We are in a situation where we are going to be moving to a different ISP and therefore, we would need to change our external IP addresses to 4 of our Cisco 1921 routers. Those routers are used only for VPN tunnels for our clients. Is there any suggestion how can we change our current public IP address given below references from our sh run:

interface GigabitEthernet0/1
ip address 78.154.104.3 255.255.255.240
ip default-gateway 78.154.104.14
ip route 0.0.0.0 0.0.0.0 78.154.104.14

can you direct me what are the commands to change the current IP address + gateway IP? Also, apart from sh run, do you think there is anything else I need to check in the router in relation to the external IP change?
0
Comment
Question by:Nitsan Reznik
1 Comment
 
LVL 9

Accepted Solution

by:
jmac44 earned 2000 total points
ID: 41890411
login with the right privileges
type this:
enable
conf t
interface GigabitEthernet0/1
ip address (new ip) (netmask)
ip default-gateway (new ip)
exit
ip route 0.0.0.0 0.0.0.0 (new ip)
exit
wr - this will save your work

sh interfaces will show detailed information on interfaces
sh ip interface brief will show if the interface is up or down and what the ip is
1

Featured Post

Ready for your healthcare security check-up?

In the past few years, healthcare organizations have become a prime target for advanced attacks. Does your organization have what it needs to defend itself? Schedule your healthcare security check-up today and download our free Healthcare Security Resource Kit today!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Concerto Cloud Services, a provider of fully managed private, public and hybrid cloud solutions, announced today it was named to the 20 Coolest Cloud Infrastructure Vendors Of The 2017 Cloud  (http://www.concertocloud.com/about/in-the-news/2017/02/0…
This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

916 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question