Solved

HTTPS/SSL based VPN will full functionality?

Posted on 2016-11-20
2
70 Views
Last Modified: 2016-11-25
I had this question after viewing Best strategy for set up a VPN from Windows 10 to a work network. Bonus if windows 7 also can connect..

A Cisco ASA (or other hardware) running  HTTPS/SSL based VPN connecting an external user to an office network, can that work without limits so in practical terms the external user will be just another internal user in the network, not limited to only WEB or some other limit?
0
Comment
Question by:Sunsales
2 Comments
 
LVL 69

Accepted Solution

by:
Qlemo earned 500 total points
ID: 41894605
Yes. You can configure the SSL VPN on ASA to redirect all traffic to the ASA, isolate the client from its LAN (other than the VPN connection) - but that is not what you've asked about ;-). DNS, WINS aso. and routes are provided with the VPN, so even name resolution works for remote targets.
Because of lags (added delays), bandwidth limitations and other restrictions you cannot expect speed to be the same, though; this is in particular true if sending a lot of small packets, where the overhead is enormous.
1
 

Author Closing Comment

by:Sunsales
ID: 41901483
Thanx
0

Featured Post

Online Training Solution

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action. Forget about retraining and skyrocket knowledge retention rates.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Possible fixes for Windows 7 and Windows Server 2008 updating problem. Solutions mentioned are from Microsoft themselves. I started a case with them from our Microsoft Silver Partner option to open a case and get direct support from Microsoft. If s…
While rebooting windows server 2003 server , it's showing "active directory rebuilding indices please wait" at startup. It took a little while for this process to complete and once we logged on not all the services were started so another reboot is …
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This is used to tweak the memory usage for your computer, it is used for servers more so than workstations but just be careful editing registry settings as it may cause irreversible results. I hold no responsibility for anything you do to the regist…

726 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question