Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

VLAN Tagged traffic

Posted on 2016-11-23
2
Medium Priority
?
52 Views
Last Modified: 2017-01-02
Really dumb question....however I've worked a fair chunk with cisco networks and its coming to the end of a 12 hour day and my brain isn't wanting to figure this out so i require some input.....

If i just want traffic to pass through a switch and i require no management of the switch remotely/ssh Do i require actually setting an IP and gateway?

So for example i have all my ports configured in vlan 20, and native vlan 1 has none. If i dont supply an IP/gateway to vlan 20.... can it still pass vlan 20 traffic?
0
Comment
Question by:Rob Leaver
2 Comments
 
LVL 6

Author Comment

by:Rob Leaver
ID: 41900015
Bump this up~!
0
 
LVL 31

Accepted Solution

by:
Predrag earned 2000 total points
ID: 41900106
If you just create VLAN and assign all ports to that VLAN traffic will be forwarded between ports in that VLAN without any problems.
vlan 20
interface range gi1/0/1 - 48
 switchport mode access
 switchport access vlan 20

Open in new window

In this case all ports are assigned to vlan 20 and traffic will be forwarded between interfaces without any additional configuration.
Also, vlan 20 is not mandatory to be created separately. Adding some port to VLAN will automatically create VLAN 20 if switch is in VTP transparent mode.
1

Featured Post

Technology Partners: We Want Your Opinion!

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
This month, Experts Exchange’s free Course of the Month is focused on CompTIA IT Fundamentals.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

971 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question