?
Solved

Connecting LAN to a new leased line

Posted on 2016-11-28
2
Medium Priority
?
124 Views
Last Modified: 2016-11-30
A client has just had a new leased line installed to replace their old ADSL connection.

The leased line provider has left us with a switch and the following details. I now need to connect the LAN with all its servers and PCs to the new connection.

I have a netgear nighthawk router which I have previously nstalled dd-wrt onto. How do I now configure the router to allow for a proper connection.

Any help would be appreciated.

Gateway IP: ***.***.131.137

===========================================
Loopback IP: ***.***.130.44 /32
WAN Block: ***.***.128.94          /30
LAN Block: ***.***.131.136 /29
===========================================
ADSL IP: ***.***.124.175/32
ADSL Username: username@connect.online
ADSL Password: *password*
===========================================
0
Comment
Question by:roy_batty
2 Comments
 
LVL 37

Accepted Solution

by:
Kimputer earned 2000 total points
ID: 41904157
The router's WAN info should be:

IP x.y.131.138
subnet mask: 255.255.255.248
GW IP x.y.131.137

Obviously, can also be quickly tested with a laptop with a LAN connection with that info.
1
 
LVL 1

Author Closing Comment

by:roy_batty
ID: 41907470
Many thanks. That worked for me.
0

Featured Post

Never miss a deadline with monday.com

The revolutionary project management tool is here!   Plan visually with a single glance and make sure your projects get done.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Make the most of your online learning experience.
In this article I will be showing you how to subnet the easiest way possible for IPv4 (Internet Protocol version 4). This article does not cover IPv6. Keep in mind that subnetting requires lots of practice and time.
Internet Business Fax to Email Made Easy - With  eFax Corporate (http://www.enterprise.efax.com), you'll receive a dedicated online fax number, which is used the same way as a typical analog fax number. You'll receive secure faxes in your email, f…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

601 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question