?
Solved

VM's not getting network or internet access

Posted on 2016-11-29
9
Medium Priority
?
86 Views
Last Modified: 2017-01-02
Recently moved all network VM's from VMWare to Hyper-V, set the two nics on host server to be a team, enable all the hyper-v warnings, still none of the VM's get a connection out, not dhcp not even tstatic. windows server 2012
0
Comment
Question by:LesmanyNunez
  • 5
  • 4
9 Comments
 
LVL 124
ID: 41906417
If you create a VM in your Hyper-V Hypervisor, do the VMs work ?

if it just the V2V-ed VMs which are not working, what if you add a new network interface ?

The Guest VM network interface is connected ?
0
 

Author Comment

by:LesmanyNunez
ID: 41906440
No they dont, somehow i cant get the Vswitch to work, i put the two nics in the Host to teamup, going via the server manager, then i am selecting a static IP to the team. then i select the create a new Vswitch setting and select the Microsoft network adapter multiplexor driver, still no go, the server itself has internet and i can rdp into it, the VM's none has nor network nor internet access.
0
 
LVL 124

Accepted Solution

by:
Andrew Hancock (VMware vExpert / EE MVE^2) earned 2000 total points
ID: 41906452
okay, let's keep it simple, and just create a vSwitch connected to a single nic (uplink) in the host.
0
Veeam and MySQL: How to Perform Backup & Recovery

MySQL and the MariaDB variant are among the most used databases in Linux environments, and many critical applications support their data on them. Watch this recorded webinar to find out how Veeam Backup & Replication allows you to get consistent backups of MySQL databases.

 

Author Comment

by:LesmanyNunez
ID: 41906460
Yes but i wanted to make one team for load balancing, so in this case i connected two cables to different switches in case of a failure, however if i do one cable, i would have to disable the second network card and use just one?.
0
 
LVL 124
ID: 41906470
Yes, I appreciate what you are trying to do, but small steps, and get something working, to isolate this issue.
0
 

Author Comment

by:LesmanyNunez
ID: 41906482
Ok i see teaming with two cards might not work as i expected them for the VM's, is there a setting i am missing, i want to use one port for managment and the other for the VM's but i cant find how to do that it only show me teaming every ware.
0
 
LVL 124

Assisted Solution

by:Andrew Hancock (VMware vExpert / EE MVE^2)
Andrew Hancock (VMware vExpert / EE MVE^2) earned 2000 total points
ID: 41906495
destroy the team, at the OS level.

Hyper-V Manager, look at networking, what do you have currently set ?
0
 

Author Comment

by:LesmanyNunez
ID: 41906511
I already destroyed it, recreated the settings and the set one nick for management and the other was added to the virtual switch, this the the trick, no teaming, i will need a separate network card to do that. thank you for your help again.
0
 

Author Closing Comment

by:LesmanyNunez
ID: 41906513
Thank you andrew
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is in regards to the Cisco QSFP-4SFP10G-CU1M cables, which are designed to uplink/downlink 40GB ports to 10GB SFP ports. I recently experienced this and found very little configuration documentation on how these are supposed to be confi…
Unable to change the program that handles the scan event from a network attached Canon/Brother printer/scanner. This means you'll always have to choose which program handles this action, e.g. ControlCenter4 (in the case of a Brother).
This video shows you how to use a vSphere client to connect to your ESX host as the root user. Demonstrates the basic connection of bypassing certification set up. Demonstrates how to access the traditional view to begin managing your virtual mac…
Michael from AdRem Software explains how to view the most utilized and worst performing nodes in your network, by accessing the Top Charts view in NetCrunch network monitor (https://www.adremsoft.com/). Top Charts is a view in which you can set seve…

864 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question