Jegajothy vythilingam
asked on
ASIO4ALL
My OS is win 10 pro 64 bit and I have the musical software called swar studio. When I load this swar, I get the error :
No device selected
No device could be selected due to the following error: The input an output devices don't share a common sample rate!/ Please correct the settings or install ASIO4ALL and rerun Swar Studio.
i had downloaded the ASIO4all driver from the internet and installed and then rebooted the pc. but I still get the same error.
No device selected
No device could be selected due to the following error: The input an output devices don't share a common sample rate!/ Please correct the settings or install ASIO4ALL and rerun Swar Studio.
i had downloaded the ASIO4all driver from the internet and installed and then rebooted the pc. but I still get the same error.
ASKER
in response to dbrunton, thank u for your response. However, in my control panel, under sound, I do not the features. What I have are shown in the attached graphics files. Thank u for your suggestion. Another problem is that there are so many selections to choose from eg; 16 bit, etc etc , that I do not which one to select. Swar also has its own listings.
ASKER
ASKER
in response to the solution, I still get the same error, which is attached as a file. Thank u.
swar-error.JPG
swar-error.JPG
All right.
What have you got plugged into your computer?
And make/model of your computer.
What have you got plugged into your computer?
And make/model of your computer.
ASKER
In response to dbrunton, the items that are plugged in are my audio speakers and my usb mike. If u wish I could run a Belarc report for u. My computer is a Lennovo, Model: M72e, here is more info :
LENOVO 3597CTO ThinkCentre M72e
System Serial Number: MJXWVHR
Chassis Serial Number: MJXWVHR
Enclosure Type: Desktop
Thank u and regards.
LENOVO 3597CTO ThinkCentre M72e
System Serial Number: MJXWVHR
Chassis Serial Number: MJXWVHR
Enclosure Type: Desktop
Thank u and regards.
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
thank u.
Control Panel --> Sound --> Playback --> (select your output device, I'll presume it is Speakers) Speakers --> click on Properties --> Advanced
Check the settings are the same as in the graphic below.
If not then alter and click on OK and back out of there. Restest.