<div>
Yes. You can always stuck switches together using any 1 GB ports and also 10GB ports but for 10GB ports probably you going to need special wire or Fiber Optic cable.<br />
I don;t know what kind of switches you have, try to check in manual.
</div>


Yes. You can always stuck switches together using any 1 GB ports and also 10GB ports but for 10GB ports probably you going to need special wire or Fiber Optic cable.
I don;t know what kind of switches you have, try to check in manual.

<div>
As long as it is a Managed Switch, you should not have any issues with Trunk Port. Is it a Cisco Switch?
</div>


As long as it is a Managed Switch, you should not have any issues with Trunk Port. Is it a Cisco Switch?

<div>
Tom <br />
<br />
The switch is a Cisco Catalyst 4948
</div>


<div>
Elango<br />
<br />
I do already have the switch config with VTP, and currently I have port 24 trunk and working...<br />
I just wanted to know my other options.<br />
<br />
Thank you for all of your help
</div>


Elango

I do already have the switch config with VTP, and currently I have port 24 trunk and working...
I just wanted to know my other options.

Thank you for all of your help

<div>
Trunking is possible. &nbsp;Just be aware that not all 4948s are 10G-capable though, not that it matters where trunking is concerned.
</div>


Trunking is possible.  Just be aware that not all 4948s are 10G-capable though, not that it matters where trunking is concerned.

<div>
<div class="content wysiwyg-content">
I have a switch the is 48 ports all ports are gig ports, there are also 2 10 gig ports.<br />
<br />
If I have another switch is same config can I create a trunk between them?<br />
<br />
I'm thinking yes, but just want to confirm.<br />
<br />
<br />
Thank you<br />
<br />
Respectfully<br />
J.Pineiro
</div>
</div>


I have a switch the is 48 ports all ports are gig ports, there are also 2 10 gig ports.

If I have another switch is same config can I create a trunk between them?

I'm thinking yes, but just want to confirm.


Thank you

Respectfully
J.Pineiro

Trunk Port

A switch is a device that filters and forwards packets of data between LAN segments. Switches operate at the data link layer or the network layer of the Open Systems Interconnection (OSI) Reference Model and therefore support any packet protocol. LANs that use switches to join segments are called switched LANs or, in the case of Ethernet networks, switched Ethernet LANs. A hub is a connection point for devices in a network. Hubs are commonly used to connect segments of a LAN. A hub contains multiple ports; when a packet arrives at one port, it is copied to the other ports so that all segments of the LAN can see all packets.